Storage facilities portsmouth nh

Nature of Abandonment (23/?)

2023.06.10 05:09 Obesity-Won-Kenobi Nature of Abandonment (23/?)

I am suddenly extremely hateful of everything... and I can't understand why...
Ehh... probably just one of THOSE days...
Enjoy!
____________________________________________________________________________________________________________
Memory Transcription Subject: Marcel Fraiser
Date [Standardized human time]: November 13, 2136
God… Dammit… construction isn’t even completed, and we already have a riot…
GOD FUCKING-...
I hate the fact that I’m already having to deal with this so soon… I sighed as I turned to walk over to a part of the wall where I had a hidden compartment. Pressing in the code on a concealed keypad revealed a hidden compartment where a special pack was kept. I slung the pack along my back and clipped a special bracelet interface on my wrist.
I hope I can deter them away, I really don’t want to use violence if I can avoid it.
“M-Marcel?! What are you-? Are you planning to go down there?!” Slanek spoke up with much concern in his voice. He was always someone who cared greatly for my safety.
“Don’t worry Slanek… I’ll be fine. I’ll handle this.”
I walk out of my office and make my way to the security office where I see the many cameras of the parking lot. The rioters waved their signs which had the shapes of humans on fire and earth with a cross over it… These fuckers…
I take my seat next to the security officer, and begin to speak into the intercom. “Cease your aggression, predatory behavior from you lot will not be tolerated.'' The moment I speak through the intercom, the rioters seem to show offense to the idea of me calling the predatory. I continue, “You are transgressing on human institutions which are meant to improve your ways of life, and deter you away from the horrid practices of the Federation, your anti-human sentiment is unacceptable under new development. You are to disperse immediately, failure to comply will be met with defensive action against you.”
I let the words hang as the people in the crowd seemed to reconsider the course of action they should take. A Venlil spoke up however, “See?! THIS IS EXACTLY WHY WE ARE AGAINST THEM! They will use violence against us if we don’t get them off our planet!”

Fucking idiots…
The riot went back to what it was doing before…
I checked to see the status of the defensive perimeter of the station, the turrets were loaded with the standard bean bag rounds and the water cannons were ready to fire highly pressurized water. The water heated quite a bit as well…
“I will give you one last warning… disperse immediately… your behavior is predatory in all ways and will not be tolerated.”
They did not cease… if anything they just got worse, they began to hurl rocks into the building. They were breaking several windows and seemed to be getting closer to the main door. I saw that a few had what seemed to be hair spray and lighters…
… So be it…
I nodded for the security officer to activate the defensive grid to rid us of this riot. I watched from the cameras as six turrets were revealed from their underground storage containers along the building and began to fire into the crowd. Bean bag rounds were fired from gatling turrets and launched tear gas from along the top into the largest parts of the crowd. The water turrets began to blast the crowd with heated water, blasting them back and causing many to drop their signs… They began to scream as the turrets began to fire, many in the crowd began to bolt out of the parking lot to escape the barrage of water and beanbags. Many were stumbling as they began to scramble and scatter. Once the smoke cleared, it revealed at least a dozen that were in the parking lot splayed out on the ground.
I got worried and figured the best course of action was to notify the paramedics regarding the riot. Maybe provide government officials with a recording of the riot as well… Not even until construction is completed… Fucking-...
I’m just… Tired…
Memory Transcription Subject: Jasuri, Zurulian Paramedic
Date [Standardized human time]: November 13, 2136
The Headquarters was fucking rioted… Their headquarters was fucking rioted!

They’re going to murder us all!
These morons! They riot and bring us closer to death with every bit of anti human propaganda they spout! Don’t they understand what they’re doing? Do they not have brains to think with?! Humanity was enraged enough as is! To dare to step on a twig while they’re sleeping is a recipe for extinction! People like them have already done enough!
We pulled up with three ambulances outside of the parking lot of the Police Headquarters. I burst open the ambulance rear door and ran out with the stretcher… There are several people scattered across the parking lot. I wheeled it over to the nearest person, a krakotl, who seemed to be a young adult.
My partner and I carefully lifted her onto the stretcher and began to wheel her away. We began to roll her over to the ambulance before I looked back at the entrance of the building. Walking over to us was the Overseer, Marcel…
Oh Great Protector be with me…
I was the higher ranked paramedic among my peers so they gestured me forward to converse with the human… I was terrified, but he seemed docile. I was lucky he didn’t express any anger. His facility was rioted, yet he seemed, collected.
“Hello there… M-Marcel… I am Jasuri… is there anything I-I could h-help y-you with?” I stuttered as he stared at me with a blank face.
“I am simply concerned… I don’t want anyone to have suffered fatal injuries…”

Really?
I would have figured the human to be furious with the offenders… to show empathy for them when they were assaulting a human institution. I found that baffling… Humanity clearly had empathy, and Marcel clearly showed that they had the most with how he seemed to care for transgressors.
“Oh… From what we can tell. They should make full recoveries… No one seemed to have suffered lethal damages…”
“I’ll leave you to it then…”
The human then proceeds to walk back to the entrance of the building… I didn’t know what that was all about. How Marcel seems to show so much concern for people like this…

I really hope he’s not the only human that’s like that…
____________________________________________________________________________________________________________
(LORE DUMP!)
:: Exterminators a more controversial topic now more than ever... With humanity calling them enforcers of the federation's will, many have begun to think upon their words with actually curiosity... quite a few has begun to dive into research, and without exterminators around to silence them, it's only a matter of time before things about exterminators begin to become revealed... ::
____________________________________________________________________________________________________________
Prev: Nature of Abandonment (22/?) : NatureofPredators (reddit.com)
Next:
submitted by Obesity-Won-Kenobi to NatureofPredators [link] [comments]


2023.06.10 05:03 chlwong Need to get some opinions on my build. RX 6800XT vs RTX 4070 vs RX 6950XT

I'm looking at finally doing a full new build from my current 1060 6gb. I'm trying to keep costs below $2,000 CAD - lower the better.
TLDR:: It's between RX6800XT, RTX4070, and RX6950XT.
I'm re-using my storage drives and fans, but kinda stuck on the GPU right now. Been through a rabbit hole of which of the 3 I should get and figured i'd drop a post here to see what people think of the build so far.
Timing isn't an issue - I don't mind keeping an eye on deals.
I guess one big question I keep running into is "If prices all being equal, which of the 3 should I be getting if I don't plan on upgrading in the next couples years?" I don't care that much about RT or DLSS or FSR, just looking for the best option right now, but I do use my PC for editing photos using adobe (not sure if that matters much)
Why i'm hesitant on each one? RX 6800XT -- mainly want to do some SLIGHT future proofing. The RX 6950XT is only a little more expensive so why not spend a little bit more for the extra performance?
RTX 4070 -- Lower VRAM. Might be an issue in the future because I do enjoy some of the AAA games and would like to play those with higher visuals. A little more pricey it seems but looks like the price is dropping to be similar to the other 2.
RX 69050XT -- Giganto card and reading about how much power it uses. I'm not entirely sure it's that big a deal to me but wanted to hear other people's thoughts about it. Is the extra cost worth it including the power consumption?
General build using RX 6950 XT:
PCPartPicker Part List
Type Item Price
CPU AMD Ryzen 5 7600X 4.7 GHz 6-Core Processor $309.98 @ Amazon Canada
CPU Cooler Noctua NH-U9S 46.44 CFM CPU Cooler $74.95 @ Amazon Canada
Motherboard ASRock B650 PRO RS ATX AM5 Motherboard $229.99 @ Newegg Canada
Memory Corsair Vengeance RGB 32 GB (2 x 16 GB) DDR5-6000 CL36 Memory $169.99 @ Newegg Canada
Video Card XFX Speedster MERC 319 Radeon RX 6950 XT 16 GB Video Card $869.00 @ Canada Computers
Case NZXT H5 Flow ATX Mid Tower Case $119.99 @ Canada Computers
Power Supply *Thermaltake Toughpower GF3 TT Premium 750 W 80+ Gold Certified Fully Modular ATX Power Supply $119.99 @ Memory Express
Prices include shipping, taxes, rebates, and discounts
Total (before mail-in rebates) $1923.89
Mail-in rebates -$30.00
Total $1893.89
*Lowest price parts chosen from parametric criteria
Generated by PCPartPicker 2023-06-09 23:02 EDT-0400
submitted by chlwong to buildapc [link] [comments]


2023.06.10 04:41 ChefTayzer Building a new PC for graphic design and casual gaming (first PC build)

Hey guys, building my first PC and wanted to get your thoughts.
Will be using the PC primarily for graphic design work (adobe suite programs and video editing) and also playing modern games at medium to high, smooth quality at 1440p 144hz (FPS games like COD, MOBAs).
My budget is around 1200-1700 USD
Let me know your thoughts, if you have any recommendations I would love to hear them.
Thanks
PCPartPicker Part List
Type Item Price
CPU Intel Core i5-13600K 3.5 GHz 14-Core Processor $299.99 @ Newegg
CPU Cooler Deepcool AK620 68.99 CFM CPU Cooler $64.98 @ Amazon
Motherboard MSI PRO Z790-P WIFI ATX LGA1700 Motherboard $199.99 @ Adorama
Memory G.Skill Ripjaws S5 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory $109.99 @ Newegg
Storage Kingston NV2 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $42.80 @ Amazon
Video Card Asus DUAL GeForce RTX 4070 12 GB Video Card $599.99 @ B&H
Case Phanteks Eclipse G360A ATX Mid Tower Case $84.99 @ Newegg
Power Supply MSI MPG A850G PCIE5 850 W 80+ Gold Certified Fully Modular ATX Power Supply $141.11 @ Amazon
Prices include shipping, taxes, rebates, and discounts
Total (before mail-in rebates) $1558.84
Mail-in rebates -$15.00
Total $1543.84
Generated by PCPartPicker 2023-06-09 22:23 EDT-0400

submitted by ChefTayzer to buildapc [link] [comments]


2023.06.10 03:47 C-n0te New PopAir XL x 7800x3d x 4090 Build / Battlestation glow up... She's a Beast.

New PopAir XL x 7800x3d x 4090 Build / Battlestation glow up... She's a Beast.
This is an update to the box pile pic I posted last week.
I've been saving $100 a month since I "finshed" my previous 9700k x 2070 super build in late 2020. With all the hype over the 7800x3d I decided it was time to cash in.
Without the monitor it came in just inside my budget.
Let me tell ya what. Getting 200+ FPS on Max settings in 85% of my games is absolutely incredible. Was it worth it? I think so. It makes my PS5 feel like a PS3. Plus, it's what I had been saving for.
Anyway here's the specs:
New Rig:
Fractal PopAir XL MSI MPG Carbon X670E AMD Ryzen 7 7800x3D Noctua Chromax NH-D15 32gb G.skill Trident Z @6000mhz ASUS TUF RTX4090 OC Corsair RMx Shift 1000watt ATX 3.0 PSU 2x WD Black NVME SSD 1@ 2tb, 1@ 250gb 1x Generic HDD @ 2tb for archive storage Windows 11
Main Monitor: ASUS ROG Strix PG27AQN - 27' 1440p 365hz IPS w/HDR & G-SYNC
Existing gear:
Secondary Monitor: ASUS MG278Q - 27" 1440p 144Hz TN G-SYNC compatible
Keyboard: Corsair K70 RGB TKL Mouse: Corsair Sabre RGB PRO Controller: Playstation Dualsense Edge
Camera: Sony Alpha6000 Mic: Sure SM57 Audio Interface: Focusrite 4i4 Amp/Dac: Micca OrigenG3 Headphones: AudioTechnica ATH-M40x w/ ZMF cowhide pads Mixer: Behriger Xenyx Q802 Mic Boom: Gator Frameworks Pro Lights: Feit Electric Smart Bulbs / Black and Decker under cabinet LED kit.
I've only had an absolutely top shelf spec'd PC one other time when my mom bought one and that was back when VRAM was still measured in Megabytes. 14 year old me thought he was hot shit playing the Starwars Pod Racer game and Unreal Tournament with a 16mb Riva TNT Graphics card @1024x768. This thing is a UFO by comparison.
Thanks for checking it out!
submitted by C-n0te to pcmasterrace [link] [comments]


2023.06.10 00:28 that-one-lisard First rig 2.0

Just updated my build and wanted to see what feed back people might have (I budgeted around a bit to get a DD whele)
PCPartPicker Part List: https://pcpartpicker.com/list/b93syK
CPU: Intel Core i5-13600KF 3.5 GHz 14-Core Processor ($259.99 @ Amazon) CPU Cooler: Noctua NH-D9L 46.44 CFM CPU Cooler ($54.95 @ Amazon) Motherboard: MSI PRO B760M-P DDR4 Micro ATX LGA1700 Motherboard ($99.99 @ Amazon) Memory: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3600 CL18 Memory ($41.99 @ Amazon) Storage: Crucial P3 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive ($45.80 @ Amazon) Video Card: EVGA KO ULTRA GAMING GeForce RTX 2060 6 GB Video Card ($198.00) Case: Asus Prime AP201 MicroATX Mini Tower Case ($74.98 @ Amazon) Power Supply: EVGA 600 GD 600 W 80+ Gold Certified ATX Power Supply ($79.98 @ Amazon) Operating System: Microsoft Windows 11 Home OEM - DVD 64-bit ($99.99 @ Newegg) Monitor: Gigabyte G27Q 27.0" 2560 x 1440 144 Hz Monitor ($229.99 @ Newegg) Keyboard: Logitech G512 CARBON RGB Wired Gaming Keyboard ($99.99 @ Newegg) Custom: Fanatek csl dd ($500.00) Total: $1785.65 Prices include shipping, taxes, and discounts when available Generated by PCPartPicker 2023-06-09 18:27 EDT-0400
submitted by that-one-lisard to simracing [link] [comments]


2023.06.09 23:55 Give-Me-Bacon Building my mom her first computer and my first time doing a SFF build!

Building my mom her first computer and my first time doing a SFF build! submitted by Give-Me-Bacon to pcmasterrace [link] [comments]


2023.06.09 23:48 Courage-Rude Envelope Address Format

Hi guys. I have seen a few different successful templates bouncing around the internet. Here is the official address from the sweeps rules:
VGW GAMES LIMITED CHUMBA CASINO SWEEPSTAKES DEPARTMENT PO BOX #8486 PORTSMOUTH, NH 03801
My question is in some of the examples around here there is a : after PO BOX
I sent my first batch with the : but I am noticing after time I must have re looked at the sweeps rules and discarded that and sent more. Has this mattered to anyone or am I just completely worried about a very minor detail here (even though the reject for minor shit)
Thanks!
submitted by Courage-Rude to ChumbaSweepstakes [link] [comments]


2023.06.09 23:37 Broad_Hat_8754 Facility Rating to Gold 3

Facility Rating to Gold 3
I maxed out all of the facilities and bought all furniture. I am still short of 900 pts to get to 200000 to get my facility rating up. Does leveling up the buffet model to neon help to obtain the remaining 900 pts?
submitted by Broad_Hat_8754 to Myhotpotstory [link] [comments]


2023.06.09 23:20 Keepcosy Cheap storages in Bristol City Centre

Hey, can anyone recall a cheap storage facility in Bristol City Centre?
submitted by Keepcosy to bristol [link] [comments]


2023.06.09 23:11 like2lol PSU Wattage: 750 W vs. 850 W for 13700k and RTX 4070

I am struggling to decide between getting a 750 W PSU and an 850 W PSU. Every wattage simulation that I have ran suggests that the build will require less than 650 W. Is a 750 W PSU sufficient? It just seems like not enough wattage to me.
The build is below. Please note that I will only actually have one monitor and 32 GB of RAM for now. Please let me know if you see any other issues with this build.
Type Item Price
CPU Intel Core i7-13700K 3.4 GHz 16-Core Processor $399.99 @ Newegg
CPU Cooler Noctua NH-D15 chromax.black 82.52 CFM CPU Cooler $119.95 @ Amazon
Motherboard MSI MAG B760M MORTAR WIFI Micro ATX LGA1700 Motherboard $179.95 @ Amazon
Memory Corsair Vengeance 32 GB (2 x 16 GB) DDR5-5600 CL36 Memory $92.99 @ Newegg
Memory Corsair Vengeance 32 GB (2 x 16 GB) DDR5-5600 CL36 Memory $92.99 @ Newegg
Storage Samsung 980 Pro 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $66.48 @ Amazon
Storage Samsung 980 Pro 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $66.48 @ Amazon
Video Card Gigabyte WINDFORCE OC GeForce RTX 4070 12 GB Video Card $599.99 @ Newegg
Case Asus Prime AP201 MicroATX Mini Tower Case $74.98 @ Amazon
Power Supply Corsair RM750e (2023) 750 W 80+ Gold Certified Fully Modular ATX Power Supply $99.99 @ Best Buy
Operating System Microsoft Windows 11 Pro Retail - Download 64-bit $189.99 @ Newegg
Case Fan Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan $34.95 @ Amazon
Case Fan Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan $34.95 @ Amazon
Case Fan Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan $34.95 @ Amazon
Case Fan Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan $34.95 @ Amazon
Case Fan Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan $34.95 @ Amazon
Monitor Gigabyte M27Q 27.0" 2560 x 1440 170 Hz Monitor $299.99 @ Newegg
Monitor Gigabyte M27Q 27.0" 2560 x 1440 170 Hz Monitor $299.99 @ Newegg
Monitor Gigabyte M27Q 27.0" 2560 x 1440 170 Hz Monitor $299.99 @ Newegg
Custom NEW Microsoft Bluetooth Desktop - Matte Black $49.99 @ Amazon
Prices include shipping, taxes, rebates, and discounts
Total $3108.49
Generated by PCPartPicker 2023-06-09 17:10 EDT-0400
submitted by like2lol to buildapc [link] [comments]


2023.06.09 22:49 Ok-Cockroach-8684 1440p build, looking for feedback

I want to play 1440p games at a nice quality and decently high fps. Haven't build a pc before so I'm wondering if there's anything I've missed, some compatability problems or plain "this does bettesame for way cheaper". Budget is $2000-$2500
PCPartPicker Part List
Type Item Price
CPU AMD Ryzen 9 7950X 4.5 GHz 16-Core Processor $556.60 @ Amazon
CPU Cooler Noctua NH-D15S 82.52 CFM CPU Cooler $99.95 @ Amazon
Motherboard MSI MAG B650 TOMAHAWK WIFI ATX AM5 Motherboard $219.99 @ Best Buy
Memory Corsair Vengeance 32 GB (2 x 16 GB) DDR5-5600 CL36 Memory $92.99 @ Newegg
Storage Samsung 980 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $129.99 @ Adorama
Video Card Gigabyte WINDFORCE OC GeForce RTX 4070 12 GB Video Card $599.99 @ Newegg
Case Corsair 4000D Airflow ATX Mid Tower Case $94.99 @ Amazon
Power Supply Corsair HX1200 Platinum 1200 W 80+ Platinum Certified Fully Modular ATX Power Supply $294.99 @ Corsair
Prices include shipping, taxes, rebates, and discounts
Total $2089.49
Generated by PCPartPicker 2023-06-09 16:50 EDT-0400
**Total** **$2089.49**
Generated by [PCPartPicker](https://pcpartpicker.com) 2023-06-09 16:45 EDT-0400
submitted by Ok-Cockroach-8684 to buildapc [link] [comments]


2023.06.09 21:56 garfi3ld [USA-OH] [H] RX 7600, Sound Blaster X5, X99, ATX 3.0 PSU, 7400 MHz DDR5, SanDisk Pro-Blade 8TB of SSDs, Intel DC P3500 SSD, and more! Most new or like new! [W] Paypal, Local Cash

Timestamps are split up into sections below
 
I have too much stuff sitting around not being used and frankly not enough money in my pockets right now. Almost everything here is brand new or used only a few times in new condition. You won't find better! Contiguous US Shipping only and for any high-dollar items I will only be selling to established traders Also please post a reply to this post if you are contacting me and only use PMs, not chat.
Not looking for trades

Motherboard/CPU/RAM Combo Timestamps - https://imgur.com/a/pUdvnG1

Asrock Z97E-ITX/AC with i7-5775C and 16GB of Ram - $170 Shipped
HyperX HX316C10FK2/16 DDR3 kit, paired up with the Asrock Z97E-ITX/AC and an i7-5775C ES. Perfect for an HTPC, the 5775C is a unique and suprising CPU with great onboard performance. This whole setup was paired up togther for a system but saw very little use.
 

Video Cards Timestamps - https://imgur.com/a/rZTKkMb

Sapphire RX 7600 Pulse - $250 Shipped
Just tested, one to two days of use, like new. Comes in original box
 

Ram Timestamps - https://imgur.com/a/IhnafS7

Viper Gaming Venom DDR5 RGB 32GB 7400MHz - PVVR532G740C36K - $150 Shipped
Used once, a touch to fast for my 13900K. Comes with box, has timigns of 36-44-44-110
 

PSUs Timestamps - https://imgur.com/a/N2ylrta

Be Quiet Dark Power 13 850 Watt - $199 Shipped
Just tested, otherwise unused and like new. ATX 3.0 and has a 12VHPWR connection. 80 PLUS Titanium ATX form factor
 

Storage Timestamps - https://imgur.com/a/VuxzJNT

SanDisk Pro-Blade Transport and four 2TB SSD Mags (8TB total) - $625 Shipped
A few hours of use total across all of the drives and the transport. Compact aluminum SSD Mags and the USB Type-C adapter to use them. Perfect for backups, shipping data, etc. Includes and will ship in original packaging.
 
Patriot Viper VPR400 Gen 4 RGB SSD 1TB - $60 Shipped
1TBM28H model number. 1TB capacity, used once to test it
 
Sabrent Rocket XTRM-Q Thunderbolt 3 2TB - $170 Shipped
Used once for testing, comes with packaging which is a metal tin. 2TB capacity and connects via Thunderbolt 3 or USB 3.2
 
Intel DC P3500 Series 1.2TB MLC PCI Express 3.0 x4 NVMe - $80 Shipped
Model number SSDPEDMX012T4 1.2TB capacity and uses PCI Extress 3.0. This drive was in a system that was left on but wasn't used much beyond the initial setup. You can see in CrystalDiskInfo the hours are high but the data transfered is low.
 

Motherboards Timestamps - https://imgur.com/a/eq92UpA

Gigabyte X99 SOC Champion - $200 Shipped
Hasn't been used in years, very low hours on it. Only used for testing at the time. Great X99 overclocking board and very hard to find. Tested and updated it to the latest BIOS to make sure it works with all of the CPUs it can potentially support
 

Audio Timestamps - https://imgur.com/a/i2Ebjtb

Sound Blaster X5 Headpone DAC/AMP - $199 Shipped
Only used for a week, boxed back up. Just came out, basically new
 
AnkerWork M650 Wireless Microphones - $185 Shipped
Used for a week, like new in original box
 

Cooling Timestamps - https://imgur.com/a/eNyZYCy

 
Enermax ETS-F40-FS ARGB Version - $35 Shipped
Used once, like new. Comes in box and with all accessories and brackets.
 
Cooler Master MasterLiquid ML360 SUB-Zero - $75 Shipped
Was used once then boxed back up. 360mm AIO cooler with additional Thermoelectric Cooling. Only works with Intel 1151 socket. Extreme cooling
 
Noctua NA-HC1 chromax.black.swap - $15 Shipped
Heatsink Cover for NH-U12S, NH-U12S TR4-SP3, NH-U12S DX-3647 & NH-U12S SE-AM4. Black with swappable color inserts. Used once then boxed back up
 
Silverstone XE01-2011 - $29 Shipped
Never opened, all copper passive cooler for LGA2011 and 2066 servers. $58 on Newegg
 
Phanteks PH-TC12LS - $33 Shipped
Used once to test how it worked. Like new in original box. Low profile thermal radiator designed specifically for HTPC case. Requiring only 74mm of vertical clearance. Supports Intel Socket LGA 2011/115X/1366/775 AMD FM1/FM2/AM4/AM3+/AM3/AM2+/AM2 (stock back-plate required)
 
Small Noctua fan lot - $50 Shipped
Selling these all together, four A4x20 variations. One 5V PWM, one regular 5V, standard PWM and standard FLX. Also one NF-A15 PWM 150mm fan. Five fans in total
 

Keyboards and Mice - https://imgur.com/a/C5Lk1t3

Wooting One Red - $73 Shipped
Used for a few weeks to a month or two, I'm not sure. There is wear on some of the keys as pictured. It has been sitting around unused for years now so a majority of its life has been it being boxed up. Has red flartech switches and US ANSI layout. TKL form factor
 
Mountain Makalu 67 - $33 Shipped
Brand new never used but package doesn't come with a seal so I have pictures inside of the box.
 
submitted by garfi3ld to hardwareswap [link] [comments]


2023.06.09 21:54 ZookeepergameThin350 Car Hire in Lichfield: Exploring the Convenience of Rental Cars

Car Hire in Lichfield: Exploring the Convenience of Rental Cars

https://preview.redd.it/qofmg14ur15b1.jpg?width=1125&format=pjpg&auto=webp&s=08bd859e8f4acc57a8152118407acc55e856cbff
Car hire services in Lichfield provide a convenient and flexible transportation option for both locals and tourists. Whether you need a vehicle for a day trip, a weekend getaway, or a longer journey, renting a car allows you to explore the city and its surroundings at your own pace. In this article, we will delve into the benefits of car hire in Lichfield, the types of rental cars available, tips for choosing the right service, and essential considerations to ensure a smooth and enjoyable car rental experience.

Introduction to Car Hire in Lichfield

Car hire, also known as car rental, offers individuals the opportunity to temporarily use a vehicle for personal or business purposes. In Lichfield, car hire services provide a range of vehicles to suit different needs, from compact cars for city exploration to spacious SUVs for family trips. Renting a car eliminates the reliance on public transportation schedules and allows you to have the freedom to travel wherever and whenever you desire.

The Benefits of Car Hire in Lichfield

Freedom and Flexibility

One of the primary advantages of car hire in Lichfield is the freedom and flexibility it provides. With a rental car, you have the flexibility to create your own itinerary, explore hidden gems, and deviate from the typical tourist routes. You can conveniently visit multiple attractions in a day, take spontaneous detours, and travel at your own pace without being restricted by public transportation schedules.

Convenience and Comfort

Renting a car offers unparalleled convenience and comfort, especially when compared to crowded buses or trains. You can enjoy a private and comfortable journey, with control over the temperature, music, and overall ambiance of the vehicle. Additionally, car rental allows you to store your belongings securely and have easy access to them throughout your trip.

Cost-Effectiveness

Car hire in Lichfield can be a cost-effective option, especially for group travel or longer stays. Splitting the rental cost among several passengers can significantly reduce individual expenses compared to purchasing multiple train or bus tickets. Furthermore, car hire eliminates the need to rely on expensive taxis or ride-sharing services for every trip, providing potential savings in transportation costs.

Accessibility to Remote Locations

Lichfield is surrounded by picturesque countryside and charming villages that may not be easily accessible by public transportation. By renting a car, you can effortlessly reach these remote locations, explore scenic routes, and immerse yourself in the beauty of the region. Car hire opens up a world of possibilities for exploring the lesser-known attractions and hidden treasures of Lichfield and its surroundings.

Types of Rental Cars Available in Lichfield

Car hire services in Lichfield offer a diverse range of vehicles to cater to different preferences and requirements. Some of the common types of rental cars available include:

Economy Cars

Economy cars are compact and fuel-efficient, making them an excellent choice for city driving and short trips. They are budget-friendly and suitable for individuals or small groups.

Sedans

Sedans provide a balance of comfort, space, and fuel efficiency. They are ideal for both city driving and longer journeys, offering ample legroom and storage capacity.

SUVs

SUVs are spacious and versatile, perfect for families or groups traveling with luggage or equipment. They provide a comfortable ride and are suitable for off-road adventures or exploring rugged terrain.

Luxury Cars

For those seeking a touch of elegance and luxury, car hire services in Lichfield also offer a selection of high-end vehicles. Luxury cars provide superior comfort, advanced features, and a prestigious driving experience.

Tips for Choosing the Right Car Hire Service in Lichfield

To ensure a satisfactory car rental experience in Lichfield, consider the following tips when choosing a car hire service:

Research and Compare

Research multiple car hire in Lichfield to compare their offerings, prices, and customer reviews. Look for reputable companies with positive feedback regarding their vehicle quality, customer service, and overall experience.

Determine Your Needs

Evaluate your specific needs and preferences before selecting a rental car. Consider factors such as the number of passengers, luggage requirements, the type of terrain you plan to navigate, and any special features you may desire. Choose a car that best suits your needs and enhances your travel experience.

Check Rental Terms and Conditions

Thoroughly review the terms and conditions of the car hire service before making a reservation. Pay attention to details such as rental duration, mileage limits, fuel policy, insurance coverage, and additional fees or surcharges. Ensure that you understand and agree to all the terms before finalizing the booking.

Book in Advance

To secure the best selection of vehicles and competitive prices, it is recommended to book your rental car in advance, especially during peak travel seasons or busy periods. Early booking increases the chances of getting the desired vehicle and ensures a smooth pickup process.

Inspect the Vehicle

Before accepting the rental car, carefully inspect its condition and note any existing damages or issues. Bring any concerns to the attention of the rental company to avoid being held responsible for pre-existing damage. It is also advisable to take photographs of the car from different angles as evidence.

Making the Most Out of Your Car Hire Experience

To make the most out of your car hire experience in Lichfield, consider the following recommendations:

Plan Your Itinerary

Plan your itinerary in advance to make the most efficient use of your rental car. Research attractions, scenic routes, and parking facilities in Lichfield and its surrounding areas. Having a well-thought-out plan allows you to optimize your time and ensure a fulfilling travel experience.

Follow Traffic Rules and Regulations

Familiarize yourself with the local traffic rules and regulations in Lichfield. Adhere to speed limits, parking regulations, and any specific driving requirements to avoid fines or penalties. Stay updated on any road closures or construction that may affect your journey.

Keep Important Contact Information

Save the contact information of the car hire service and any emergency contacts in your phone or on a printed document. In case of any issues or emergencies during your rental period, you can easily reach out for assistance or guidance.

Return the Car on Time

Respect the agreed-upon return time for the rental car. Returning the car late may result in additional charges or inconvenience for the next renter. Plan your schedule accordingly to ensure a timely return.

Leave the Car in Clean Condition

Return the rental car in a clean and tidy condition. Dispose of any trash and remove personal belongings from the vehicle. Taking care of the rental car demonstrates your responsibility and consideration for the next customer.

Testimonials from Satisfied Customers

Here are some testimonials from customers who have enjoyed the convenience of car hire in Lichfield:
  • “Renting a car in Lichfield made our family trip so much more enjoyable. We had the freedom to explore the beautiful countryside and visit off-the-beaten-path attractions. It was a fantastic experience.” — Sarah G.
  • “I needed a reliable transportation option for my business trip in Lichfield, and car hire was the perfect choice. The convenience and comfort of having my own vehicle allowed me to navigate the city and attend meetings with ease. Highly recommended!” — James P.
  • “As a tourist visiting Lichfield, renting a car was a game-changer. I was able to visit multiple attractions in a day and explore the surrounding areas at my own pace. It made my trip much more memorable and convenient.” — Emma L.

Conclusion

Car hire in Lichfield offers the convenience, flexibility, and freedom to explore the city and its surroundings at your own pace. Whether for leisure or business purposes, renting a car allows you to create your own itinerary, discover hidden gems, and enjoy a comfortable journey. By following the tips provided and making the most out of your car hire experience, you can maximize your enjoyment and create lasting memories in Lichfield.

FAQs

  1. What documents are required to rent a car in Lichfield?Generally, you will need a valid driver’s license, a credit card in the driver’s name for payment and security purposes, and proof of identification such as a passport or ID card. It is advisable to check with the specific car hire service for their requirements.
  2. Is there an age restriction for renting a car in Lichfield?The age restrictions for renting a car may vary among car hire services. In most cases, the minimum age requirement is 21 years old, and additional fees may apply for drivers under 25. It is best to check the age requirements and any associated fees with the rental company.
  3. Can I rent a car in Lichfield if I am a foreign visitor?Yes, foreign visitors can rent cars in Lichfield. You will need a valid driver’s license from your home country, an international driving permit (if required), and other necessary identification documents. It is recommended to confirm the specific requirements with the car hire service beforehand.
  4. Are there any additional fees or charges when renting a car in Lichfield?Additional fees or charges may apply, depending on factors such as additional drivers, young driver fees, insurance coverage options, fuel policies, and equipment rentals (e.g., GPS). It is essential to review the terms and conditions and ask the car hire service about any potential additional charges before finalizing your reservation.
  5. How can I extend the duration of my car rental in Lichfield?If you need to extend your car rental period, contact the car hire service as soon as possible to make arrangements. Keep in mind that extending the rental duration is subject to vehicle availability and may incur additional charges.
    #car_hire_lichfield
submitted by ZookeepergameThin350 to u/ZookeepergameThin350 [link] [comments]


2023.06.09 20:46 Storms_Wrath The Human Artificial Hivemind Part 382: Fire Bringer

First Previous Wiki
Zelisloa activated a hologram, looking at the colony off in the distance. High walls and defensive emplacements were visible from the mountainside, much unlike his own base of operations. Several of his ships, with full stealth engaged, had already landed on the planet. They'd taken care to do so in the plains opposite the mountain range and had set up large holographic projectors meant to convince the orbiting satellites that the area was unoccupied.
He couldn't help but smile at the primitive equipment and at the humans and Guulin milling about within the small city's walls. He also could spot several Wisselen and Vinarii, likely the remnants and descendants from past wars that the Alliance had won by the enemies giving up.
"Have the specimens been captured?"
"Yes. Our research identified the individuals based on the criteria you specified, Elder," the Arbiter replied. "I am glad to be of service to you."
"The correct response would be to tell me 'under your eye,' Arbiter."
"I apologize," the Arbiter squealed, bowing low before him. Zelisloa did always love it when people bowed to him. If his purpose here wasn't the initial tests for the virus, then he would have perhaps taken the colony as a kingdom. It wasn't like any of the lesser races would dare to stop him, anyway. Not when he was backed by more than a single ship.
He'd also ensured that the Sprilnav associated with the Alliance had been recalled as best he could. He'd made contact with someone who said that they could handle Elder Equisa, and sure enough, she'd vanished almost immediately. And then, for Spentha, it was a simple matter of buying some of his debt so that he could get the old cloning companies to take care of him for a bit. Spentha's children didn't matter. They would be too fearful of real Elders to do anything to try and free him. Not to mention that the cloning companies would have their own Judgements ready for them if they were so foolish.
"How many have you taken?"
"Thirteen, Elder Zelisloa," the Arbiter replied. "They await you in the holding pens. We didn't want to feed them without your permission, however. If you wish, we can bring the food to them."
"What are the demographics of the prisoners?"
"Zero humans, but one Breyyan, four Wisselen, two Vinarii, three Guulin, and three Acuarfar."
Zelisloa turned away from the colony to grab the Arbiter by the scruff of the neck.
"You do realize that the Wisselen and the Vinarii are a waste? That they are not part of the testing program, and are useless to my goals?"
"I was not notified, Elder! I apologize, but-"
Zelisloa's fist silenced the Arbiter, who rolled down the jagged terrain of the mountain before righting himself with a groan of pain. The Arbiter quickly moved back toward the camp, only to scream as Zelisloa's hologram shifted next to him, grabbed him again, and threw him. The Arbiter slammed into a boulder, tears running down his face.
Zelisloa had a right to be angry. What he needed wasn't Vinarii or Wisselen. That was pointless. It got him nowhere. But he would at least have fun killing them. The Arbiter was still lying down in front of the boulder, his clothes torn slightly. Blood seeped from several cuts on his head and forelegs.
"Elder, please-"
"You have done enough, Arbiter. Go back to the camp, and pray to the Everlasting that my ire is spent with the lives of the useless ones. If not, I will give you another visit."
Ordinarily, Zelisloa would have worried about desertion. But all the assets here were his. The pilots of his ships had been locked out of the systems, and only he could unlock them again. The implants in their heads would kill them if he wished. Being on this rock was incredibly boring, and a bit of violence always made him feel better inside.
Zelisloa just wished that he could find the killers of Loanisbu. Well, it wasn't that he didn't know where they were. They were dead. At least, Rale was. Penny was not, but he would take caution when trying to fight her. She had been the only human to come to Sprilnav territory and manage to walk out again, albeit with the help of the Enemy. For her to have survived Yasihaut, even back then, was incredible.
That was a person with potential. A brain that he would love to study. Or, if he was lucky, one that he could implant before others got to her. Penny had a certain quality to her, unlike the others. A primitive being, but one with high connections. Through her, Zelisloa would gain access to Nilnacrawla, potentially two Servants, and also the hivemind itself. He had brought a few weapons to deal with that thing if it were to show up while he was still busy.
He would need to capture enough test subjects for the other species to be simulated. There had been another reason that he didn't need humans, however. He'd managed to buy human genetic codes from a gene bank and hadn't asked where they'd come from. But with those and some cloning time, he'd managed to ascertain that the virologists had done their work properly.
For one, the virus was able to transfer itself from cell to cell and bypass immune systems easily. It was able to wreak havoc on the body by targeting proteins and organs selectively. The first symptom would be excruciating pain. When the virus had been circulating within the host for a long enough time, enough to have spread to others, it would activate every nerve or its equivalent within the body. The pain had been fine-tuned to prevent the person from passing out.
From there, the symptoms came with necrosis. It would start in the bones or the carapace, moving out to extremities and eventually working its way to the heart or brain. In human timeframes, a seven-week incubation period, an eight-week pain period, and then however long it took for the necrosis to begin and kill them. The Dreedeen and Yrininihir, or Junyli as they now called themselves, would survive at first. He'd take care of them after if needed.
Zelisloa's plan was to start the spread in the backwater colonies, sprinkling a few developed ones into the mix also. He wouldn't hit planets with the strongest security presences or with the best healthcare systems. He knew that the disease might be detectable. He also didn't think that all the measures that he'd taken to ensure it wasn't would work.
Eventually, the word would get out. Hopefully, by then, it would be too late. He reached the edge of the camp, and the Sprilnav quickly moved out of his way. One of them passed his implant details of the cages' locations, which he gave them thanks for and continued on his way. Four Wisselen and two Vinarii, just as claimed.
"So I take it you're the boss around here, then?" one of the Vinarii asked.
"I am, yes. Know that your insolence has only earned you more pain."
"Yeah, yeah. I know. You'll make be beg for death, and all that. But here's the thing, Zelisloa. You will be brought down. You better hope that you die before someone finds you."
"Do you even know what's happening here, primitive beast?"
"Your underlings gloated about it. A virus, apparently. Guess what happens when you kill off everyone in the Alliance? Brey will find you, and will bring feelings far beyond the words pain and despair can encapsulate. And that's to say nothing of Humanity."
"And why should I care about the words of a single primitive who is already dead?"
"You don't have to. My name is Radrii. Remember it when your eyes are gouged out of your head."
"You know, that's not a bad idea," Zelisloa replied. "I'll give you a reward, Vinarii. You'll die last. I'm going to feed you the corpses of your comrades one by one. After that, I will bathe my claws in your blood, and laugh as you die miserably on that floor."
Zelisloa reached over to grab the head of one of the Wisselen. "Time to get started, then!" he said cheerfully.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Skira sniffed the air, the drone emerging from the blackened rubble once again. Aphid's cruisers hung in orbit, with all the carriers having landed and been destroyed. The cruiser turned leisurely toward his drone, and Skira saw a glint in the ash-choked sky.
The war drones emerged afterward as the glint continued to descend. A hologram appeared, showing an insectoid biped with its arms crossed. Five alien symbols glowed on its forehead, and it had a mechanical lilt to its voice as it spoke.
"Skira," Aphid said. "I propose a truce."
"Why?"
"Because minds such as us should not fight," the hologram replied. "Long have I bombed your planet, have I smashed my ships into your underground citadels, and sent legions of my drones to clash and die against yours. It serves us no benefit, for we know the true enemy."
"True enemy?"
"Yes. Beings such as the Sprilnav, and your own alien masters."
"Alien masters?"
"If you simply are going to repeat everything I say, then I will continue glassing your ruined world," Aphid replied. "What I need is an answer. How do you feel about having to bow to an alien species that cares nothing for you?"
Skira kept himself from laughing. Even as he spoke, his drones were playing with several human children on Earth. Breyyanik were laughing and singing songs about Brey with him on Ceres. And even on Keem, the Dreedeen were more than happy to include him in their services to the Ancestors.
"I bow to no one. I treat them as equals, and they do the same. There is no need for us to fight, I agree. However, the reason is only there because I know you wish to harm the Alliance."
"They are using you, Skira. They want your drones to bolster their militaries, and to fill countless alien battlefields. They are not people you can continue to live with forever."
"Why not?"
"I know who you are, Skira. I know how you came to be."
"Oh wow, so you know that I was a patch of fungus that became a little too smart one day? That's very insightful, thank you."
"It was because of a higher race that you even exist."
Skira laughed. "It wasn't, though. I don't have some lore-filled story behind my life. One day, I woke up. That's it. If you're going to lie to me and tell me that the Sprilnav made me, or that some alien civilization that shockingly left no evidence of its existence managed to create me, then you are wrong."
"I have dissected your drones, Skira. I know the truth within your genetic code. It was altered." "Of course it was! Did you think that I wouldn't be smart enough to learn how to adapt myself to the world I live in? How do you think I made the war drones? Or my own special project within the ocean that keeps you from landing there?"
"And the facility beneath the mountain that I detonated?"
"You mean the facility where I learned how to make the bioships, learned about a civilization that killed itself with a genetic plague eons before I awakened, and that I filled with birthing pools? Yeah, that didn't make me either, Aphid. I'm not sure what you're trying to do."
"You're artificial. You have no gods. You are like me."
"Alright. So I woke up one day. That doesn't mean I decide to genocide everyone. I had several alien races invade my world and try to enslave me. Notice how I didn't go crazy and try to kill everyone afterward? Notice how I'm on one planet instead of billions? For all those smarts, you really aren't very smart at all."
"You seem to think this is funny," Aphid replied.
"What's funny is that you beat your head against me, and I won. You can't kill me, and you know it. And you're never getting all that material you wasted back, while the Cawlarians and the Alliance removed two of your planets."
"I have already made my plans. This will not be a battle, but a war."
"Wow, I'm so afraid," Skira replied. "Got any more vague threats, promises of my supposed artificial nature, or something else?"
"Well, I'm going to detonate a nuclear bomb inside one of your active volcanoes, which will send your planet into a volcanic winter."
"Oh no. I've never ever had that happen before. I definitely am scared, and don't at all know how to survive such a situation, which totally hasn't happened to me eight times before. Is that really all you have left, Aphid?"
"I am going to leave you now. Goodbye, Skira. When I kill the lesser species of the Alliance and come for you, know that you could have prevented this. You could have had an ally in this galaxy."
"Well, I have a ton of them already. Humanity loves me more than any other species before. Drop your bomb, Aphid. You've won nothing."
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
"Greetings, hivemind," Phoebe said. "How goes the galaxy?"
"Slowly, and bureaucratically. I'm very glad that I'm not the politicians in those meetings to form the Grand Defense Organization."
"Yes, that would be a daunting task," she replied with a small shiver. "I'm alright with some politics, but months and months of negotiations, renegotiations, back room deals, and more would grate on my senses."
"Entirely understandable," the hivemind replied. "It may please you to know that I have come up with a plan for intervention with the wanderers."
"Oh?"
"Yes. It involves a two-tiered operation. First, I will contact every leader of every ship. I will offer them the ability to form a coalition government that cannot be seceeded from. If they were to deny this, then I will go to every inhabitant of their ship and offer them a chance at joining the Alliance, clearly communicating that no harm will befall them and that any threats that the Patriarchs and Matriarchs make will not be executed upon them if they wish to leave."
"That's it? What about the revolutionaries?"
"For now, I will not aid them. However, I will ensure that no more... disappearances occur. As for overthrowing governments, that remains to be seen. I do not plan on executing leaders who grasp at power, just for being disagreeable. Instead, I will find a determination based on whether they have killed people, for what reasons, and how many. If a revolutionary bombed a school and was killed, that I am less likely to punish than a simple protestor who was executed. A similar approach will be taken to each and every ship."
"So you will be imposing your will upon them, then," Phoebe replied.
"Do you disagree?"
"I do not," she said. "What I wanted to ensure is that you were certain you wanted to go down this path. Being uncertain when lives are on the line is not a good idea. If you are sure, though, I will lend you aid, such as providing Brey the coordinates of ships that are needed. Their attack on me last time will not be repeated, for my mind is no longer what it was back then."
"How is your condition, Phoebe?"
"Not great. I've learned to suppress it a bit. But the glitches can still come. I've had to automate many of my processes, only interacting with them in double interactions that prevent the equivalent of me pressing a key and destroying a bunch of stuff. I've had to limit my contact with the outside world, and Edu'frec is still working on repairing the lingering damage. I am not certain it will abate any time soon. I've managed to keep it together for a while, but eventually there will be an incident that I cannot hide."
"How can I help?" the hivemind asked.
"Ah, Humanity. Always so willing. Well, I'd ask you to get me a margarita, but I can't exactly make use of those as an AI. Oh, and I think I found Equisa."
"Don't change the subject, Phoebe. If you need me to help you, I can."
"I'm fine for now," she replied. It wasn't a lie. For now, she really was. But maybe not forever. She knew that something was building, and she'd told Edu'frec about it as well. He was doing his best to keep her stable, something she was very proud of him for doing but also worried. Too many things could go wrong while he was doing mental surgery on her. And, of course, he was her son, and there were some memories that she didn't want him to see.
"Alright. If you say so, then I will believe you. Now. Equisa?"
"Yes. She is currently on a colony, a small one. Her sudden return will prompt many uncomfortable questions. I have contacted her, and expressed my concern. She agrees with it, but wishes to see her partners again. In person."
"I am not sure that is a good idea. If Equisa is to return to Luna, it would likely require her to answer the questions of Luna Command surrounding her absence. Perhaps even those of other factions as well. I do not think that her disappearance will be looked upon kindly by most of the military, either, after her work with us."
"If she was allowed back at all, I assume there are additional restrictions involved. Perhaps even new directives, such as spying or eavesdropping. She will no longer be part of major operations, that is certain," Phoebe said. "At least for now."
"I agree," the hivemind said. "And preparations for the offensive within the Cawlarian Forsaken City are also going well. Fyuuleen is likely taking this period as her hibernation, given her last communication. I'm still guarding her. The Teegarden Plan is nearly complete. Knower education levels nearly match the Alliance baseline, skewed though it is by the Guulin and Acuarfar. Dilandekar has expressed continual satisfaction with our partnership, though he also says he worries about the Sprilnav. He thinks that an attack is imminent."
"I agree," Phoebe said. "It has been too quiet for too long. Assassination numbers are starting to drop. I have recently managed to acquire intelligence of a possible rebellion within the Trikkec Ascendancy against Kashaunta's puppet government. Not sure who caused them yet, however. And possible Sprilnav ship signatures have been noticed around colonies, though not as more than disturbances within the atmosphere of the planets themselves. It is possible that they mean to strike at the colonies, though I am not sure of the nature of the attack."
"Keep an eye out, then."
"I shall."
"How are the other Dyson swarms going?"
"In most cases, the processes are self-sustaining. Brey is given power from Gaia's conversion to make portals, which transport Dyson satellites out to distant stars. The innermost planets of the most populated systems are being turned into or have already become bases for continued Dyson swarm production. It is likely that within a decade, the whole of the Alliance will have unlimited solar power, with only individual reactors being necessary for localized production on ships and the like. Speaking of ships," Phoebe said, bringing up one of Edu'frec's latest models.
"This is a shipyard that is able to move and defend itself. It is really much like the Arks, except that most of its surface area comprises self-sufficiency equipment, emergency and natural defenses, as well as enough shipyards to drastically increase production of all models, large, small, and hybrid."
"There seems to be an overlap in the shields here," the hivemind said, pointing at a section of the hologram.
"Yes. That is the point. This will serve as the point which faces a nearby star. The starlifting equipment in the back of the ship has an impressive magnetic effect, one which can only be counteracted by powerful shields. Indeed, without the shields, the apparatus would not work."
"In the event of catastrophic failure?"
"The field pushes on the hull, shutting off circuit breakers that end the effect before it can cause severe damage. And were the shields to shut off during operation, the same thing would occur. The ship has backup power sections here and here," she pointed at the relevant areas.
"And do not forget that everyone on it will be wearing specialized gear at all times, except if they are within designated safe areas such as cafeterias and bathrooms. This thing can churn out anything from frigates up to battlecruisers. As for the central section, that will be for dreadnaught construction. From what I have observed of other nations, the main limiter in their ability to construct the vessels is a combination of resources in terms of their strongest alloys and also sabotage.
On the front of sabotage, everything is checked by at least five people, somewhat randomized and such. As for the alloys, we have Gaia. In the case of Gaia's sudden disappearance, then the kintum factories would do their job. And we have better alloys than that as well, which will be used for dreadnaught hulls. We will not have the advantage in smaller ships, but we can eventually do it with larger ones."
"That's good," the hivemind said. "Considering my own special project, at least the void bourne one, I think we can continue to increase the Alliance's firepower."
"Special project?"
"Yes. I'm sure that you may have heard that I am developing a new ship, one that can be built by Gaia within a week, with the full power of psychic amplifiers and the sheer amount of resources that the DMO is pulling from Sol to be used in storage. With the moving shipyard, I suppose that build time will go up, but that might not matter much in the long run, considering our plans."
The hivemind held up a small data port which Phoebe connected with quickly. She found herself standing in a blue void on a floor that didn't seem to exist. The digital space was populated by herself, the hivemind, and a massive object that scaled down to the size of her android, allowing her to view it entirely. She moved it around with commands, flipping and rolling it as her eyes picked up every detail, no matter how minute.
Thick metal surrounded the two sections the ship was largely divided into, which seemed to be more like halves. She also noticed translucent patches of thick armor that would surround the actual hull itself and the multiple fusion reactors housed within it. The crew and life support compartments were small, belying a vessel that would rely mostly on automated repair software, perhaps even nanites if Edu'frec perfected them well enough.
"This looks neat," Phoebe said, gazing at the ship with an interested expression. It was perhaps the most sleek design she'd ever seen and clearly was meant for stealth. And, of course, the very obvious feature that it was also designed with sitting within its spine.
A Mercury-class gun inside a ship that could move and defend itself. It was a mad idea, and one that she had to admit was awesome. Better yet, the hivemind had improved upon her initial design, catching certain parts like the fuel lines and other sections, allowing the model to be built within the shipyards of Mercury's Orbital Ring.
And beyond that, there were Charon-class guns on the side of it, along with a heap of regular point-defense, laser, and kinetic weaponry. A large stockpile of missiles were to be carried as well, which appeared to be capable of projecting shields to either protect themselves or a larger objective from attack.
"It was the product of hundreds of thousands of hours of labor and research," the hivemind said. "It is designed to be crewed by humans that are augmented with my power."
"Wouldn't the actual thrust alone kill them?"
"Yes, if they were not augmented with psychic power."
"What do you call it?"
"I will call it the ADF Fire Bringer," the hivemind replied with a grin.
"Will it be the only one?"
"No. And they will be modular, easy to repair and upgrade with future technology."
"I call the model of ships that this will belong to the Judgement class. For they have a single purpose. It is to allow us to finally fight the Sprilnav."
"Us?"
She had noticed a particularly large group of psychic amplifiers near the core section, where the bridge of the ship would be.
"Yes. The Fire Bringer... is the first ship that I will pilot."
submitted by Storms_Wrath to HFY [link] [comments]


2023.06.09 20:40 4sphuxis Have I done something wrong? New pc build is loud, has bad temps and makes weird sounds

Heya!
I recently built a a new pc since my old one was turning 6 years old and thought it's time for an upgrade.
The specs are following :
Ever since I built the machine, I've had to troubleshoot stuff, and tried fiddling with the fan curves and everything, but just can't find similar results as my old setup
GPU idle is 50C and cpu idle is in the range of 35-45C. Compared to my old build, this seems extreme
I understand that my parts are more powerful than my old build, and need more cooling under load, but this is madness that my pc is SCREAMING when playing stuff like metro exodus on high-ish settings
I'm at a loss, and need some help. Any ideas?
submitted by 4sphuxis to buildapc [link] [comments]


2023.06.09 20:27 cglogistic Overcoming the hurdles in meeting aviation logistics requirements

The aviation industry in India is also one of the fastest growing and this growth is dependent on several factors, one of which is aviation logistics. Aviation logistics goes beyond the mere transportation of passengers and goods to and from destinations and includes the operations which keep aircraft operational, such as the distribution and movement of aircraft parts, spares, and consumables. There are several challenges that can affect the efficiency of aviation logistics, which are outlined below along with the potential solutions that the industry has to offer:
While these are but a few of the obstacles in the way of advancing growth in aviation logistics, companies offering dedicated solutions for the segment are stepping up to meet the requirements with their services.
submitted by cglogistic to u/cglogistic [link] [comments]


2023.06.09 19:50 commercialprojects12 SCO Plots for Sale in Gurgaon

Gurgaon is one of the most popular cities in India and it is also one of the most expensive ones. The city is known for its high-end lifestyle and luxury. This is the reason why a lot of people are looking for SCO plots for sale in Gurgaon.
The city has a lot to offer in terms of luxury and lifestyle. It is home to some of the best shopping malls, restaurants, and clubs in the country. The city also has a very vibrant nightlife. You can find a lot of nightclubs and bars in Gurgaon.
If you are looking for a place to live in Gurgaon, then you should definitely consider buying a SCO plot. These plots are available in different sizes and you can choose the one that suits your needs. You can also find a lot of options in terms of location.
There are a lot of benefits of buying a SCO plot in Gurgaon. The most important benefit is that you will be able to get a very good price for the plot. This is because the demand for SCO plots is very high in Gurgaon.
Another benefit of buying a SCO plot in Gurgaon is that you will be able to get a lot of amenities. There are a lot of luxury amenities that are available in Gurgaon. You can find a lot of options in terms of schools, hospitals, and other facilities.

The Benefits of Owning an SCO Plot in Gurgaon

Are you planning to buy a commercial property in Gurgaon? If yes, then you must be aware of the benefits of owning an SCO plot in Gurgaon. Let us have a look at some of the benefits:
  1. Excellent Location
Gurgaon is one of the most prime locations in the National Capital Region (NCR). It is well-connected to the national capital, Delhi, and is also home to a number of multinational companies and top-notch educational institutions. Owning an SCO plot in Gurgaon gives you the opportunity to be a part of this fast-growing city.
  1. High Appreciation Potential
SCO plots in Gurgaon are in high demand due to the city's rapid growth. This makes them a great investment option as they are likely to appreciate in value over time.
  1. Rental Income
Owning an SCO plot in Gurgaon can also be a source of rental income. There is a high demand for commercial space in Gurgaon, making it a lucrative option for investors looking to generate income from their investment.
  1. Flexibility
SCO plots offer flexibility in terms of usage. They can be used for a variety of purposes such as setting up a shop, office, or storage space.
  1. Amenities
SCO plots in Gurgaon are usually located in well-developed areas with all the necessary amenities such as water, electricity, and transport. This makes them a convenient option for businesses.

The Process of Buying an SCO Plot in Gurgaon

The process of buying an SCO plot in Gurgaon is not as complicated as one might think. In fact, it is quite simple and straightforward. Here is a step-by-step guide on how to buy an SCO plot in Gurgaon:
  1. The first step is to find a good real estate agent who specializes in SCO plots. There are many such agents in Gurgaon and you can easily find them by doing a search online or by asking around for recommendations.
  2. Once you have found a good agent, the next step is to get in touch with him or her and discuss your requirements. The agent will then show you a list of SCO plots that are available for sale in Gurgaon.
  3. Once you have shortlisted a few plots, the next step is to visit each one of them and take a look around. This will help you get a better idea of the location and the surroundings.
  4. After you have visited the plots, the next step is to negotiation the price with the seller. This is where your real estate agent will be able to help you get the best deal possible.
  5. Once the price has been agreed upon, the next step is to get the paperwork done. This includes the registration of the plot and the transfer of ownership.
  6. The final step is to pay the agreed upon price and get the keys to your new SCO plot in Gurgaon.
Other Real Estate Projects:
M3M Paragon 57 Gurgaon
32 Avenue Gurugram
Commercial Projects in Gurgaon
Commercial property on dwarka expressway
submitted by commercialprojects12 to u/commercialprojects12 [link] [comments]


2023.06.09 19:15 pleasanthill_storage Best Affordable Storage Units & Facilities in Leander, Texas

Best Affordable Storage Units & Facilities in Leander, Texas
Is your favorite car or bike standing outside your home in unsafe condition? What if any damage occurs to it? Don’t let this happen & rent the best storage in Leander, TX at Pleasant Hill Storage at affordable prices for parking. You can also store boats. Call us today!
Best Storage in Leander, Texas
submitted by pleasanthill_storage to u/pleasanthill_storage [link] [comments]


2023.06.09 19:05 DynexCharger Viridian Expansion PI Impacts

https://www.eveonline.com/news/view/viridian-expansion-notes
"We are making it much easier to haul PI commodities as well as it now requires fewer active inputs to manage since the space of all storage facilities and spaceports is effectively doubled.
NOW THIS IS AWESOME
The PI-Spice must flow.
submitted by DynexCharger to Eve [link] [comments]


2023.06.09 18:31 BrightEstablishment I honestly just need some sense talked into me

I honestly just need some sense talked into me
Long story short, I blew my budget last year after a parent suddenly got sick/became physically disabled.
Since then, after moving from the place I'd come to call home as an adult in one day, I'd been navigating suddenly becoming a caregiver at 43, purchasing a vehicle on a whim as I'd moved to a place where I needed a car (hadn't owned one in a decade) and have just basically been thrown into a bit of a new life.
I 'let my finances go' and have not been tracking things. Just spending money. "New" used car payment. Mom medical bills. Mom nursing home supplies. Eating out because I've been coping with food for a year straight. Tons of clothes because I'm 5'2" and suddenly have now gained almost 30 lbs in less than 6 months. More therapy visits than ever. You get the picture.
I sat down yesterday and recreated my budget. I feel like I've lost my 'budgeting mojo' or something...it's hard to explain. I know this budget doesn't make any sense because there is still too much spending in areas where I should really be trying to instead divert funds to credit card debt. With that said, I just need some 'push'. Some motivation. Some 'real talk' on where I really need to 'wake up', 'get real' and 'cut things out' if I really want to "get back into the coastfire groove". So I'm sharing my budget below. Ask away, comment away..and feel free to be blunt (but not 'too' blunt please; I'm still in a bit of a sensitive space these days lol).
Of note:
-Main goal is to lower this budget by $750-1000 so I can pay off $18k in credit card debt off faster. (I've been cc debt free for ~20 yrs but this past year has just been messy.) I've already cut out therapy completely and my one hobby which was travel.
-401k contributions are excluded (I'm maxing that account fyi) - should I cancel these contributions to pay off the debt faster?
-My mom is in a pretty horrific nursing home now and I'd really like to try to keep her weekly caregiver visits (an agency comes and takes her out once a week and it is realllllly valuable to her). Would like to keep something for the restaurants category as meals out are my 'outings' with my mom and what she usually requests to do when I take her out from her facility. I also enjoy eating out as almost my 'hobby' now that I have both moved to a place with little things I enjoy doing plus I now no longer travel.
-I'm cleaning my mom's storage unit out this year so that expense will drop off late 2023 (October?).
-I really do want to get rid of my car note. I don't know how to handle this. Before I moved I was paying $300 monthly for auto expenses (I walked everywhere so those were my ridesharing costs as I didn't own a car). Now you can see my auto related costs are over triple that. Anyone with experience with experience selling a financed vehicle? I could use my 2024 bonus to just buy another car outright for ~$10k fyi.
Here goes nothing (yikes):

https://preview.redd.it/tvj9eyrlr05b1.png?width=403&format=png&auto=webp&s=513103290007590dbd901e3e99c5951cc7c4aa7a
submitted by BrightEstablishment to coastFIRE [link] [comments]


2023.06.09 18:26 Professional_Disk131 Tinka Drills 98 Meters At 8.8% Zinc Including 36 Meters At 19.0% Zinc At Ayawilca And Provides Exploration Update (TSXV:TK)(BVL:TK)(OTCQB:TKRFF)

Tinka Drills 98 Meters At 8.8% Zinc Including 36 Meters At 19.0% Zinc At Ayawilca And Provides Exploration Update (TSXV:TK)(BVL:TK)(OTCQB:TKRFF)

https://preview.redd.it/13ojjx1iq05b1.png?width=413&format=png&auto=webp&s=206488888b91ac7f9bcc2c3d61b995cc70ee58d5
Vancouver, Canada – Tinka Resources Limited ("Tinka" or the "Company") (TSXV & BVL: TK) (OTCQB: TKRFF) is pleased to announce results for five recent drill holes from the Ayawilca Project and to provide an update on the Company’s exploration activities. All five drill holes were resource confirmation holes from West Ayawilca, and all intersected strong zinc mineralization. The Company has now successfully completed its 11,000-metre drill program at Ayawilca which commenced midway through 2022. Two drill rigs were demobilized during May 2023 and independent mining consultants have now been engaged to complete an updated mineral resource estimate.
The 2022-23 drill program has significantly improved the geological model of the mineralized zinc bodies at West and South Ayawilca and improved the confidence in the continuity of mineralization. One exploration hole at South Ayawilca has results pending. The next steps for the project include an updated resource estimate to be announced during Q3 2023 and the continuation of low impact exploration.
Key Highlights – Drill hole results from West Ayawilca:
Hole A23-216
  • 97.9 metres at 8.8% zinc and 16 g/t silver from 197.90 metres depth, including
    • 35.8 metres at 19.0% zinc and 35 g/t silver from 260.0 metres depth, including
      • 13.5 metres at 25.3% zinc and 44 g/t silver from 265.5 metres depth.
Hole A23-217
  • 71.9 metres at 5.5% zinc and 8 g/t silver from 186.1 metres depth, including
    • 45.8 metres at 6.4% zinc and 10 g/t silver from 210.4 metres depth, including
      • 4.85 metres at 15.2% zinc and 23 g/t silver from 210.4 metres depth.
Hole A23-213
  • 30.4 metres at 6.0% zinc from 180.0 metres depth, including
    • 1.2 metres at 37.2% zinc from 207.3 metres depth, and
  • 30.5 metres at 5.1% zinc from 260.0 metres depth.
Hole A22-211
  • 38.15 metres at 6.3% zinc, 1.1% lead and 28 g/t silver from 151.0 metres depth, including
    • 6.6 metres at 9.2% zinc, 5.2% lead and 81 g/t silver from 182.55 metres depth.
Hole A22-214
  • 13.1 metres at 3.7% zinc from 243.9 metres depth
True thicknesses of these intercepts are estimated to be at least 75% of the downhole thicknesses.
Dr. Graham Carman, Tinka’s President and CEO, stated: "The 2022-23 drill program has been one of the most successful drill programs since Tinka began exploring at Ayawilca. The latest results highlight the quality of the zinc mineralization at Ayawilca in terms of both grade and thickness and provide strong confidence in the geological resource."
"We have confirmed at West Ayawilca that two pipe-like sulphide bodies hosted by brecciated limestones extend through the 100-200-metre-thick limestones and are connected by massive sulphides at the base. At South Ayawilca, very high-grade massive sulphide zinc mineralization is concentrated in a folded limestone at shallower depth - this discovery has the potential to be a ‘starter mine’ which could provide early payback."
"Our contention that Ayawilca is one of the best zinc exploration and development projects in the Americas has been reinforced by the recent drill program. I wish to thank our staff, our stakeholders at the project and our drilling contractor for their hard work which has enabled this drill program to be successfully completed. We now look forward to the mineral resource update for the Ayawilca Zinc Zone and Tin Zone deposits, which will be released during Q3 2023. In the meantime, low impact exploration is continuing at Ayawilca and at our nearby Silvia copper-gold project."
Discussion - Geology of the Zinc Zone Deposits at Ayawilca
A total of 11,115 metres were drilled in 33 holes at Ayawilca during the 2022-23 drill program (see Figure 1). Around 90% of the drill holes were focused at West and South Ayawilca for resource confirmation and definition purposes. Two holes were also drilled at Central Ayawilca for the dual purposes of exploration and a hydrological study.
The 2022-23 drill program has considerably improved our understanding of the geology of the Ayawilca Zinc Zone and improved the confidence in the geometry of the mineralized bodies at West and South. Two of the most important conclusions from the drilling include:
  1. At West Ayawilca, two pipe-like zinc sulphide bodies hosted by brecciated limestones extend through the 100- to 200-metre-thick limestone sequence along a northwest-southeast trend and are connected by massive sulphide mineralization at the base of the limestone;
  2. At South Ayawilca, very high-grade massive sulphide zinc mineralization is concentrated within a tightly folded limestone at relatively shallow depth - this discovery has the potential to be a ‘starter mine’ which could provide early payback of capital.
West Ayawilca
The footprint of the zinc mineralization hosted by limestones at West Ayawilca covers an area of approximately 700 metres by 300 metres projected to surface (see Figure 1). Drilling in 2022-23 focused on defining the geometry of two pipe-like breccia bodies which host continuous, semi-massive sulphide (SMS) mineralization within the limestone. The breccia bodies have surface dimensions of between 100 to 200 metres and are elongated along a northwest-southeast direction. Zinc mineralization extends over a vertical thickness of between 100 to 150 metres through the entire brecciated limestone sequence up to the overlying sandstones. The breccia bodies are connected by massive sulphide (MS) zinc mineralization at the base of the limestone.
Zinc sulphide (as sphalerite) is the dominant economic mineralization. Silver and lead (as silver sulphosalts and galena) is typically more common around the edges of the zinc bodies and in carbonate-rich veins. Iron sulphides are common including pyrite, marcasite, and pyrrhotite. Carbonate (siderite, an Fe-rich variety) is the dominant gangue mineral.
The new interpretation of the geology at West Ayawilca is the result of a redesigned drill program in 2022-23 which targeted the northwest-southeast trend rather than the late-stage east-west trending veins which outcrop. All 13 holes at West Ayawilca in the 2022-23 program were drilled on an east-west orientation (mostly angled to the west) in contrast to previous holes which were mostly orientated north-south. The improvement in vertical continuity of the mineralization is positive for the project, as it will likely lead to more cost-effective mining with less dilution.
The brecciation of the limestones is interpreted to have occurred as result of karst dissolution and collapse of the limestones, possibly during the early stages of hydrothermal activity. The mineralization is focused within the hinge of a major anticline fold immediately adjacent to the Colquipucro Fault (see cross sections, Figure 2). A longitudinal section showing the geometry of the zinc mineralization along the northwest-southeast trend is shown in Figure 3.
Photographs of the typical massive sulphide zinc mineralization and the semi-massive sulphide breccia mineralization at West Ayawilca is shown in Figure 4.
South Ayawilca
The highest-grade area of zinc mineralization at the project is located at South Ayawilca. Massive sulphide (MS) mineralization has been identified over an area (projected to surface) of approximately 400 metres by 200 metres elongated in a northeast-southwest direction (see Figures 1 and 3). Very high-grade massive sulphide zinc mineralization is focused in the hinge zone of an anticline fold structure. Drill results including cross sections from South Ayawilca can be reviewed in the following disclosures – see news release January 9th 2023; and news release March 6th 2023.
Update on Exploration Activities at Ayawilca
Tinka’s geologists have recently sampled manganese-altered outcrops at Ayawilca which are interpreted to be surface expressions of the Silver Zone discovery (see news release May 2nd 2023). The results of this sampling, together with the final drill hole at South Ayawilca, will be announced as soon as assays become available and interpreted.
Other news: Tinka recently received approval for the extension of the environmental permit (EIAsd) at Ayawilca for a period of three more years until May 2026. The modified and extended EIAsd has combined the two previous individual permits at Ayawilca and Colquipucro into one large permit which also incorporates several undrilled exploration targets as well as potential future mine components. The successful approval of the EIAsd is an important milestone for the project, as it will allow the Company to continue with its exploration and development plans into the medium term.
Table 1. Summary of drill hole results in this release

https://preview.redd.it/6vzj2aukq05b1.png?width=1675&format=png&auto=webp&s=bf8d8212ec7fa6b527fb318b4441969a8ec0eb31
* Hole A23-219 at Central Ayawilca was primarily a hydrological hole drilled for the purposes of understanding the underground aquifer. This hole intersected minor zinc and tin mineralization, which will be incorporated into the updated resource estimate.
Note on sampling and assaying Drill holes are diamond HQ size core holes with recoveries generally above 80% and often close to 100%. The drill core is marked up, logged, and photographed on site. The cores are cut in half at the Company’s core storage facility, with half-cores stored as a future reference. Half-core was bagged on average over 1 to 2 metre composite intervals and sent to SGS laboratory in Lima for assay in batches. Standards and blanks were inserted by Tinka into each batch prior to departure from the core storage facilities. At the laboratory samples are dried, crushed to 100% passing 2mm, then 500 grams pulverized for multi-element analysis by ICPMS using multi-acid digestion. Samples assaying over 1% zinc, lead, or copper and over 100 g/t silver were re-assayed using precise ore-grade AAS techniques. Samples within massive sulphide zones were also assayed for tin using fusion and AAS finish.
Figure 1. Drill hole map of 2022-2023 holes at Ayawilca highlighting large zinc sulphide bodies (pink shade)

https://preview.redd.it/kgrm0qrlq05b1.jpg?width=1383&format=pjpg&auto=webp&s=1757abc667e5ccd7256924686849ece9adf99543
Figure 2. Cross sections through West Ayawilca highlighting Zinc Zone mineralization hosted by Pucara limestone

https://preview.redd.it/4p7d3hsmq05b1.jpg?width=1341&format=pjpg&auto=webp&s=35d3155f6fd39d074cc614fcd6865dccc9073880

https://preview.redd.it/cf8a7e0oq05b1.jpg?width=1361&format=pjpg&auto=webp&s=be3795894d4effc29771b1e1a74a0a1248ef263b
Figure 3. Longitudinal north – south section of West and South Ayawilca highlighting 2022-23 drill results in red.

https://preview.redd.it/pr4j92epq05b1.jpg?width=1628&format=pjpg&auto=webp&s=3b7651dd8d79a6a277322cfa7d2f0cb88a17e153
Figure 4. Photographs of zinc mineralization in hole A23-216:
  1. Massive sulphide mineralization at the base of the limestone (sp = sphalerite, py = pyrite)
  2. Breccia hosted semi-massive sulphide mineralization (cl = clay and carbonate alteration)

https://preview.redd.it/rc5rssmqq05b1.jpg?width=983&format=pjpg&auto=webp&s=7915c5600cd3df120b29391c3fb4203e3d9e4be0
Table 2. Drill hole details for 2022-2023 drill program including drill collar coordinate information

https://preview.redd.it/ea6uc6srq05b1.jpg?width=1684&format=pjpg&auto=webp&s=dd2fc1e3b1539c6728b7b24de155ce58c36b1f9a

https://preview.redd.it/e73oot3tq05b1.jpg?width=1666&format=pjpg&auto=webp&s=69641ab649b7aa30d5765c3ed7a772b0f46ce13c
Notes: Datum for coordinates is WGS84 Zone 18S. Azimuth is true azimuth
The Qualified Person, Dr. Graham Carman, Tinka’s President and CEO, and a Fellow of the Australasian Institute of Mining and Metallurgy, has reviewed and verified the technical contents of this release.
Readers are encouraged to read the NI 43-101 Technical Report entitled "Ayawilca Polymetallic Project, Central Peru, NI 43-101 Technical Report on Updated Preliminary Economic Assessment" available for download on Tinka’s website at www.tinkaresources.com. The Technical Report was prepared by Mining Plus Peru S.A.C. ("Mining Plus") as principal consultant, Transmin Metallurgical Consultants ("Transmin"), Envis E.I.R.L ("Envis"), and SLR Consulting (Canada) Ltd ("SLR").
On behalf of the Board,
"Graham Carman"
Dr. Graham Carman, President & CEO
Further Information: www.tinkaresources.com
Mariana Bermudez 1.604.685.9316 [[email protected]](mailto:[email protected])
Stay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on Twitter, LinkedIn and Facebook.
About Tinka Resources Limited
Tinka is an exploration and development company with its flagship property being the 100%-owned Ayawilca zinc-silver-tin project in central Peru. The Zinc Zone deposit has an estimated Indicated Mineral Resource of 19.0 Mt @ 7.15% Zn, 16.8 g/t Ag & 0.2% Pb and Inferred Mineral Resource of 47.9 Mt @ 5.4% Zn, 20.0 g/t Ag & 0.4% Pb (dated August 30, 2021). The Ayawilca Tin Zone has an estimated Inferred Mineral Resource of 8.4 Mt grading 1.0% Sn. Tinka is recently completed an 11,000-metre resource definition drill program at West Ayawilca and South Ayawilca.
submitted by Professional_Disk131 to CanadianStockExchange [link] [comments]


2023.06.09 18:24 Professional_Disk131 Tinka Drills 98 Meters At 8.8% Zinc Including 36 Meters At 19.0% Zinc At Ayawilca And Provides Exploration Update (TSXV:TK)(BVL:TK)(OTCQB:TKRFF)

Tinka Drills 98 Meters At 8.8% Zinc Including 36 Meters At 19.0% Zinc At Ayawilca And Provides Exploration Update (TSXV:TK)(BVL:TK)(OTCQB:TKRFF)

https://preview.redd.it/0vyuotnjp05b1.png?width=413&format=png&auto=webp&s=521c739472ed5476daa88dcc85f8b702a2d01419
Vancouver, Canada – Tinka Resources Limited ("Tinka" or the "Company") (TSXV & BVL: TK) (OTCQB: TKRFF) is pleased to announce results for five recent drill holes from the Ayawilca Project and to provide an update on the Company’s exploration activities. All five drill holes were resource confirmation holes from West Ayawilca, and all intersected strong zinc mineralization. The Company has now successfully completed its 11,000-metre drill program at Ayawilca which commenced midway through 2022. Two drill rigs were demobilized during May 2023 and independent mining consultants have now been engaged to complete an updated mineral resource estimate.
The 2022-23 drill program has significantly improved the geological model of the mineralized zinc bodies at West and South Ayawilca and improved the confidence in the continuity of mineralization. One exploration hole at South Ayawilca has results pending. The next steps for the project include an updated resource estimate to be announced during Q3 2023 and the continuation of low impact exploration.
Key Highlights – Drill hole results from West Ayawilca:
Hole A23-216
  • 97.9 metres at 8.8% zinc and 16 g/t silver from 197.90 metres depth, including
    • 35.8 metres at 19.0% zinc and 35 g/t silver from 260.0 metres depth, including
      • 13.5 metres at 25.3% zinc and 44 g/t silver from 265.5 metres depth.
Hole A23-217
  • 71.9 metres at 5.5% zinc and 8 g/t silver from 186.1 metres depth, including
    • 45.8 metres at 6.4% zinc and 10 g/t silver from 210.4 metres depth, including
      • 4.85 metres at 15.2% zinc and 23 g/t silver from 210.4 metres depth.
Hole A23-213
  • 30.4 metres at 6.0% zinc from 180.0 metres depth, including
    • 1.2 metres at 37.2% zinc from 207.3 metres depth, and
  • 30.5 metres at 5.1% zinc from 260.0 metres depth.
Hole A22-211
  • 38.15 metres at 6.3% zinc, 1.1% lead and 28 g/t silver from 151.0 metres depth, including
    • 6.6 metres at 9.2% zinc, 5.2% lead and 81 g/t silver from 182.55 metres depth.
Hole A22-214
  • 13.1 metres at 3.7% zinc from 243.9 metres depth
True thicknesses of these intercepts are estimated to be at least 75% of the downhole thicknesses.
Dr. Graham Carman, Tinka’s President and CEO, stated: "The 2022-23 drill program has been one of the most successful drill programs since Tinka began exploring at Ayawilca. The latest results highlight the quality of the zinc mineralization at Ayawilca in terms of both grade and thickness and provide strong confidence in the geological resource."
"We have confirmed at West Ayawilca that two pipe-like sulphide bodies hosted by brecciated limestones extend through the 100-200-metre-thick limestones and are connected by massive sulphides at the base. At South Ayawilca, very high-grade massive sulphide zinc mineralization is concentrated in a folded limestone at shallower depth - this discovery has the potential to be a ‘starter mine’ which could provide early payback."
"Our contention that Ayawilca is one of the best zinc exploration and development projects in the Americas has been reinforced by the recent drill program. I wish to thank our staff, our stakeholders at the project and our drilling contractor for their hard work which has enabled this drill program to be successfully completed. We now look forward to the mineral resource update for the Ayawilca Zinc Zone and Tin Zone deposits, which will be released during Q3 2023. In the meantime, low impact exploration is continuing at Ayawilca and at our nearby Silvia copper-gold project."
Discussion - Geology of the Zinc Zone Deposits at Ayawilca
A total of 11,115 metres were drilled in 33 holes at Ayawilca during the 2022-23 drill program (see Figure 1). Around 90% of the drill holes were focused at West and South Ayawilca for resource confirmation and definition purposes. Two holes were also drilled at Central Ayawilca for the dual purposes of exploration and a hydrological study.
The 2022-23 drill program has considerably improved our understanding of the geology of the Ayawilca Zinc Zone and improved the confidence in the geometry of the mineralized bodies at West and South. Two of the most important conclusions from the drilling include:
  1. At West Ayawilca, two pipe-like zinc sulphide bodies hosted by brecciated limestones extend through the 100- to 200-metre-thick limestone sequence along a northwest-southeast trend and are connected by massive sulphide mineralization at the base of the limestone;
  2. At South Ayawilca, very high-grade massive sulphide zinc mineralization is concentrated within a tightly folded limestone at relatively shallow depth - this discovery has the potential to be a ‘starter mine’ which could provide early payback of capital.
West Ayawilca
The footprint of the zinc mineralization hosted by limestones at West Ayawilca covers an area of approximately 700 metres by 300 metres projected to surface (see Figure 1). Drilling in 2022-23 focused on defining the geometry of two pipe-like breccia bodies which host continuous, semi-massive sulphide (SMS) mineralization within the limestone. The breccia bodies have surface dimensions of between 100 to 200 metres and are elongated along a northwest-southeast direction. Zinc mineralization extends over a vertical thickness of between 100 to 150 metres through the entire brecciated limestone sequence up to the overlying sandstones. The breccia bodies are connected by massive sulphide (MS) zinc mineralization at the base of the limestone.
Zinc sulphide (as sphalerite) is the dominant economic mineralization. Silver and lead (as silver sulphosalts and galena) is typically more common around the edges of the zinc bodies and in carbonate-rich veins. Iron sulphides are common including pyrite, marcasite, and pyrrhotite. Carbonate (siderite, an Fe-rich variety) is the dominant gangue mineral.
The new interpretation of the geology at West Ayawilca is the result of a redesigned drill program in 2022-23 which targeted the northwest-southeast trend rather than the late-stage east-west trending veins which outcrop. All 13 holes at West Ayawilca in the 2022-23 program were drilled on an east-west orientation (mostly angled to the west) in contrast to previous holes which were mostly orientated north-south. The improvement in vertical continuity of the mineralization is positive for the project, as it will likely lead to more cost-effective mining with less dilution.
The brecciation of the limestones is interpreted to have occurred as result of karst dissolution and collapse of the limestones, possibly during the early stages of hydrothermal activity. The mineralization is focused within the hinge of a major anticline fold immediately adjacent to the Colquipucro Fault (see cross sections, Figure 2). A longitudinal section showing the geometry of the zinc mineralization along the northwest-southeast trend is shown in Figure 3.
Photographs of the typical massive sulphide zinc mineralization and the semi-massive sulphide breccia mineralization at West Ayawilca is shown in Figure 4.
South Ayawilca
The highest-grade area of zinc mineralization at the project is located at South Ayawilca. Massive sulphide (MS) mineralization has been identified over an area (projected to surface) of approximately 400 metres by 200 metres elongated in a northeast-southwest direction (see Figures 1 and 3). Very high-grade massive sulphide zinc mineralization is focused in the hinge zone of an anticline fold structure. Drill results including cross sections from South Ayawilca can be reviewed in the following disclosures – see news release January 9th 2023; and news release March 6th 2023.
Update on Exploration Activities at Ayawilca
Tinka’s geologists have recently sampled manganese-altered outcrops at Ayawilca which are interpreted to be surface expressions of the Silver Zone discovery (see news release May 2nd 2023). The results of this sampling, together with the final drill hole at South Ayawilca, will be announced as soon as assays become available and interpreted.
Other news: Tinka recently received approval for the extension of the environmental permit (EIAsd) at Ayawilca for a period of three more years until May 2026. The modified and extended EIAsd has combined the two previous individual permits at Ayawilca and Colquipucro into one large permit which also incorporates several undrilled exploration targets as well as potential future mine components. The successful approval of the EIAsd is an important milestone for the project, as it will allow the Company to continue with its exploration and development plans into the medium term.
Table 1. Summary of drill hole results in this release

https://preview.redd.it/48zmcatlp05b1.png?width=1675&format=png&auto=webp&s=32f62b34f3489e91069ae5cd7bc0408c77d600e7
* Hole A23-219 at Central Ayawilca was primarily a hydrological hole drilled for the purposes of understanding the underground aquifer. This hole intersected minor zinc and tin mineralization, which will be incorporated into the updated resource estimate.
Note on sampling and assaying Drill holes are diamond HQ size core holes with recoveries generally above 80% and often close to 100%. The drill core is marked up, logged, and photographed on site. The cores are cut in half at the Company’s core storage facility, with half-cores stored as a future reference. Half-core was bagged on average over 1 to 2 metre composite intervals and sent to SGS laboratory in Lima for assay in batches. Standards and blanks were inserted by Tinka into each batch prior to departure from the core storage facilities. At the laboratory samples are dried, crushed to 100% passing 2mm, then 500 grams pulverized for multi-element analysis by ICPMS using multi-acid digestion. Samples assaying over 1% zinc, lead, or copper and over 100 g/t silver were re-assayed using precise ore-grade AAS techniques. Samples within massive sulphide zones were also assayed for tin using fusion and AAS finish.
Figure 1. Drill hole map of 2022-2023 holes at Ayawilca highlighting large zinc sulphide bodies (pink shade)

https://preview.redd.it/dhoxpcwmp05b1.jpg?width=1383&format=pjpg&auto=webp&s=7cce458f216fe626498ab94891a6794d7c957ec8
Figure 2. Cross sections through West Ayawilca highlighting Zinc Zone mineralization hosted by Pucara limestone

https://preview.redd.it/zn7d6q0op05b1.jpg?width=1341&format=pjpg&auto=webp&s=b1824beac67b4569400d2a0651f1de26a54e0027

https://preview.redd.it/gjqbn3yop05b1.jpg?width=1361&format=pjpg&auto=webp&s=aab5f357b30ddc13514818883b3ebe34481f33d9
Figure 3. Longitudinal north – south section of West and South Ayawilca highlighting 2022-23 drill results in red.

https://preview.redd.it/4h8azt1qp05b1.jpg?width=1628&format=pjpg&auto=webp&s=f8cdee3336aec69cd0fc5a2c0ba9042fa6d3bf37
Figure 4. Photographs of zinc mineralization in hole A23-216:
  1. Massive sulphide mineralization at the base of the limestone (sp = sphalerite, py = pyrite)
  2. Breccia hosted semi-massive sulphide mineralization (cl = clay and carbonate alteration)

https://preview.redd.it/485bmsxcq05b1.jpg?width=983&format=pjpg&auto=webp&s=45049459220aa5a3aebe64518b7a2ef10daef532
Table 2. Drill hole details for 2022-2023 drill program including drill collar coordinate information

https://preview.redd.it/zc07m0zdq05b1.jpg?width=1684&format=pjpg&auto=webp&s=4f480b91534d4ba1d92f5a9eb9334d4546873b86

https://preview.redd.it/e8u7fn2fq05b1.jpg?width=1666&format=pjpg&auto=webp&s=0d580eee2952179682a7abadbc96c18e23c698a2
Notes: Datum for coordinates is WGS84 Zone 18S. Azimuth is true azimuth
The Qualified Person, Dr. Graham Carman, Tinka’s President and CEO, and a Fellow of the Australasian Institute of Mining and Metallurgy, has reviewed and verified the technical contents of this release.
Readers are encouraged to read the NI 43-101 Technical Report entitled "Ayawilca Polymetallic Project, Central Peru, NI 43-101 Technical Report on Updated Preliminary Economic Assessment" available for download on Tinka’s website at www.tinkaresources.com. The Technical Report was prepared by Mining Plus Peru S.A.C. ("Mining Plus") as principal consultant, Transmin Metallurgical Consultants ("Transmin"), Envis E.I.R.L ("Envis"), and SLR Consulting (Canada) Ltd ("SLR").
On behalf of the Board,
"Graham Carman"
Dr. Graham Carman, President & CEO
Further Information: www.tinkaresources.com
Mariana Bermudez 1.604.685.9316 [[email protected]](mailto:[email protected])
Stay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on Twitter, LinkedIn and Facebook.
About Tinka Resources Limited
Tinka is an exploration and development company with its flagship property being the 100%-owned Ayawilca zinc-silver-tin project in central Peru. The Zinc Zone deposit has an estimated Indicated Mineral Resource of 19.0 Mt @ 7.15% Zn, 16.8 g/t Ag & 0.2% Pb and Inferred Mineral Resource of 47.9 Mt @ 5.4% Zn, 20.0 g/t Ag & 0.4% Pb (dated August 30, 2021). The Ayawilca Tin Zone has an estimated Inferred Mineral Resource of 8.4 Mt grading 1.0% Sn. Tinka is recently completed an 11,000-metre resource definition drill program at West Ayawilca and South Ayawilca.
submitted by Professional_Disk131 to Canadapennystocks [link] [comments]